Mallas y Cribas | Inoxidables del Bajío

01 (462) 62 511 38 | (462) 62 517 51

Ventas de Menudeo y Mayoreo.

Malla en acero inoxidable tipo 304 y 316, a diferentes calibres

Tejido Plano

MESH	CALIBRE	DIAMETRO DEL ALAMBRE		ABERTURA			AISI	ANCHO
MESH	CALIBRE	PULGADAS mm		PULGADAS mm %			AISI	PULGADAS mt.
MESH	GAUGE	WIRE DIAMETER		OPENING			AISI	MESUREMENTS
MESH	GAUGE	INCH	mm	INCH	mm	%	AISI	INCH	mt.
2X2	16	0.0630	1.600	0.4370	11.1000	76.4	304	40 – 51	1 – 1.3
3X3	16	0.0630	1.600	0.2700	6.860	65.6	304	40 – 51	1 – 1.3
4X4 R	16	0.0630	1.600	0.1870	4.750	56.0	304	51	1.3
4X4	18	0.0480	1.220	0.2030	5.160	65.1	304	40 – 51	1 – 1.3
5X5	20	0.0350	0.890	0.1650	4.180	68.1	304	40	1
6X6 R	18	0.0480	1.220	0.1200	3.050	51.8	304	40 – 51	1 – 1.3
6X6	20	0.0350	0.890	0.1320	3.350	62.7	304	48	1.22
8X8	21	0.0320	0.810	0.0930	2.360	55.4	304	40 – 51 – 60	1 – 1.3 – 1.52
10X10 R	21	0.0320	0.810	0.0680	1.730	46.2	304	40 – 51	1 – 1.3
10X10	23	0.0250	0.630	0.0770	1.950	56.3	304	40 – 51 – 60	1 – 1.3 – 1.52
12X12	24	0.0220	0.560	0.0610	1.550	51.8	304	40 – 51 – 60	1 – 1.3 – 1.52
14X14	25	0.0200	0.500	0.0510	1.300	51.0	304	40 – 51 – 60	1 – 1.3 – 1.52
16X16	26	0.0180	0.460	0.0450	1.130	50.7	304	40 – 51 – 60	1 – 1.3 – 1.52
18X18	26	0.0180	0.460	0.0380	0.960	45.9	304	40 – 51 – 60	1 – 1.3 – 1.52
20X20	27	0.0160	0.410	0.0340	0.860	46.2	304	40 – 51 – 60	1 – 1.3 – 1.52
24X24	28	0.0140	0.350	0.0280	0.700	45.8	304	40 – 51	1 – 1.3
30X30	30	0.0120	0.300	0.0210	0.540	40.8	304	45 – 51 – 60	1 – 1.3 – 1.52
35X35	32	0.0100	0.250	0.0190	0.470	42.4	304	51	1.3
40X40	32	0.0100	0.250	0.0150	0.380	36.0	304	45 – 51 – 60	1 – 1.3 – 1.52
50X50	33	0.0090	0.230	0.0110	0.279	30.3	304	45 – 51 – 60	1 – 1.3 – 1.52
60X60	34	0.0073	0.180	0.0090	0.229	33.9	304	45 – 51 – 60	1 – 1.3 – 1.52
65X65	34	0.0073	0.180	0.0080	0.201	26.4	304	40	1.3
80X80	39	0.0053	0.130	0.0070	0.180	31.4	304	45 – 51 – 60	1 – 1.3 – 1.52
100X100	41	0.0045	0.110	0.0060	0.140	30.3	304	40 – 48 – 51 -60	1 – 1.22 – 1.30 – 1.52
120X120	43	0.0035	0.090	0.0046	0.120	30.3	304	40 – 48 – 51	1 – 1.22 – 1.30
150X150	45	0.0026	0.066	0.0041	0.104	37.8	304	40 – 48 – 51	1 – 1.22 – 1.30
165X165	47	0.0021	0.053	0.0040	0.102	41.0	304	40 – 48 – 51	1 – 1.22 – 1.30
180X180	47	0.0021	0.053	0.0035	0.089	40.7	304	40 – 48 – 51	1 – 1.22 – 1.30
200X200	47	0.0021	0.053	0.0029	0.074	33.6	304	40 – 48 – 51	1 – 1.22 – 1.30

Tipos de Mallas

El estilo de tejido describe la forma en que los alambres se cruzan por encima y por debajo.
Hay dos estilos de tejidos comunes: Tejido sencillo y Tejido doble.